Complete treatment plants and the equipment inside them, from intake screening to clear-water decanting.
Sewage, slurry, aeration and water-supply pumps. IP68, Class F, S1 continuous duty across every series.
Disposers that grind kitchen waste at the sink and flush it away — for homes and for commercial kitchens.
From feedstock shredding at the front of a biogas plant, through intake screening and aeration in a treatment line, to the pump moving it all — the full Point range, with the specifications our engineering team sizes against.
01 — Biogas pre-processing
Waste isn’t always ready for digestion. Foreign matter, packaging, fibrous materials, inconsistent particle sizes, and variable moisture content all affect feeding, digestion efficiency, and biogas output. This range exists to solve exactly that — preparing waste for better digestion, higher yield, and more reliable operation.
High-fibre feedstock
Efficiently shreds high-fibre organic materials like Napier grass, rice straw, and corn stalks — feedstocks that would otherwise resist breakdown and slow digestion. Purpose-built for agricultural and high-biomass applications.
Full specifications
Homogenizing
Homogenizes organic waste for efficient handling — breaking down mixed and inconsistent material into a uniform slurry that moves reliably through pumping and digestion stages.
Full specifications
In-digester
Maintain homogeneous conditions throughout the process, preventing sedimentation and settling that would otherwise reduce digester efficiency and biogas output.
Full specifications
Dry waste
Reduces organic waste into a consistent particle size for efficient downstream processing, complementing the wet-waste shredding and maceration range for sites handling mixed dry and wet feedstock.
Full specifications
Composting
Converts food and biodegradable waste into nutrient-rich compost, hygienically and on-site — reducing waste volume and disposal costs through fast, fully automated composting.
Packaged plant
A ready-built, packaged biogas plant that converts daily food waste into usable gas and organic manure — sized for homes, hostels, hotels, canteens, apartments, institutions and commercial kitchens without a custom civil build.
Full specifications
Site-engineered plant
A custom-engineered, site-constructed biogas plant built around your feedstock, capacity, site conditions and output requirements — for projects a packaged unit can't size to.
Full specificationsEvery feedstock needs a different combination of this equipment — a distillery residue and a poultry manure stream won’t be pre-processed the same way. Our engineering team assesses your waste characteristics — fibre content, moisture, particle size, contamination — before recommending a line, rather than selling a fixed package.
02 — STP / ETP equipment
A treatment line runs from screening at the intake, through surface clean-up, mixing and aeration, to clear-water recovery and solids handling. Each piece below is sized against your channel width, tank depth, and treatment capacity — not sold as a one-size-fits-all package.
Intake screening
Used in intake channels of urban sewage plants, waterworks, and stormwater drainage to automatically intercept and remove floating debris, protecting downstream processes. A motor-driven chain and sprocket system powers scraper rakes that lift screenings clear of the water and discharge them automatically. Anti-jamming design, overload protection, automation-ready.
Screen angle 60°–80° (75° recommended) · discharge height 400–1500 mm, standard 800 mm
Surface clean-up
Collects and removes floating grease, oil, foam, scum, and other surface contaminants before they interfere with biological treatment downstream — particularly important in food & beverage and oil-heavy industrial effluent. Used in clarifiers, equalization and sedimentation tanks, DAF systems, and lagoons.
Mixing
Compact and easy to maintain, with a self-cleaning blade that prevents debris from twining or blocking the mechanism. Paired with an aerator it lowers energy consumption while maintaining a high aeration rate and preventing sedimentation. Supports nitrification, de-nitrification, and phosphorus removal. Tungsten carbide mechanical seal.
Aeration
Provides oxygen for biological degradation of organic material and oxidation of dissolved minerals, while keeping solids in suspension. Based on the venturi-nozzle principle, introducing atmospheric air into water without complex mechanisms. Suited to small and medium sewage plants at depths up to 6 metres.
Aeration
Simple to install even in a flooded tank, and self-aspirating — no compressed air supply needed, and it can supply oxygen during breakdown or overload conditions. Low noise compared to surface systems, no aerosol effect, and usable where water levels vary without bridges or special structures.
Aeration & circulation
High-efficiency bottom aeration with fine micro-bubbles (~1.5 mm), combining aeration, mixing, and circulation for complete water-body rejuvenation. Adjustable spray angle up to 60°, stainless steel and high-strength plastic construction. Reduces sludge, foul odour, harmful gases, and algal growth — suited to ponds, lakes, and landscape water.
Advanced oxygenation
Generates ultra-fine micro and nano bubbles for superior aeration, raising dissolved oxygen with high interfacial activity. Bubble collapse produces highly reactive hydroxyl radicals that help oxidize and break down organic pollutants — improving clarity and supporting solid-liquid separation and activated sludge performance.
Advanced oxygenation
Produces bubbles in the nanometre range for exceptional gas-liquid contact and extended retention — nano bubbles rise slowly and stay suspended longer, increasing oxygen transfer efficiency and dissolving gradually for maximum utilization with minimal waste. For sites needing higher dissolved-oxygen performance.
Clear water recovery
Removes only the supernatant water, without entrapment of solids. The pump adjusts automatically as the liquid level changes, drawing clear water from between settled sludge and surface debris, and stops when a sensor detects the water turning cloudy — protecting effluent quality without operator intervention.
Optional light-sensor controller and float-switch panel for fully automated operation
Solids handling
Fully automated, continuous-processing dewatering with minimal manual intervention. Energy-efficient, with corrosion-resistant stainless steel construction for long service life in a compact footprint — configurable to specific process requirements. Used on livestock farms, in digestion plants, and in distillery and starch processing.
A typical line runs screening → surface clean-up → mixing and aeration → clear water recovery → solids handling, with micro/super-nano generators added where higher dissolved-oxygen performance is needed. Our engineering team sequences and sizes that line around your site.
03 — Pumping range
Drainage, sewage, slurry, cutter, grinder, chopper, multistage and boosting — built on the same construction standards and rated for demanding, always-on conditions rather than intermittent light duty.
Installation & maintenance
Connects and disconnects pumps from the piping system by simply lifting the pump up and down — no bolting or unbolting of flanges, and no sump entry. The pump mounts on guide rails via a guide hook at the discharge, and its own weight ensures a leak-free seal.
Drainage · 2880 rpm
High-speed drainage pump for grey water, drainage, and effluent in residential, commercial, or industrial applications.
Sewage
For sewage, sludge, effluents, or surface water carrying solid or fibrous material. Impellers and casings available in graded steels for special applications.
Agitator slurry
Delivers kinetic energy to agitate settled solids and re-suspend them to a fluid state — for industrial mining and power plant duties where solids must be kept mobile for transfer.
Cutter
For grey water, septic effluent, soft solids, hard dirt, and effluent with significant fibrous content. Stationary and rotating cutters in En24/OHNS/D2, hardened to 55–60 HRC.
Drainage cutter · 2880 rpm
High-speed pump for drainage water and effluent, with a cutting impeller and a stationary cutter plate that shear fibrous material at the inlet — residential, commercial and industrial sites.
Grinder
For sewage, sludge, effluent or surface water mixed with solid or fibrous material — a hardened stainless grinder shears solids into small particles before the impeller.
Chopper
Chops and pumps oversized solids and stringy materials, along with fibrous and other hard materials — for the most demanding solids-handling duties. High-chromium steel or case-hardened En36/OHNS cutters.
Chopper grinder · biogas
Purpose-built to transfer solid and thick-mass particles — ideal for biogas processing of wet organic materials, and for sewage water containing up to 5% wet organic material. Screw rotor in OHNS or D2, chopper cutter in CF8 with carbide or HCHCr tips.
High discharge · 20–100 HP
For sewage, sludge, effluents, or surface water with solid or fibrous material at large-scale flow rates, across residential, commercial, and industrial applications.
Clear water
For clear water transfer and circulation in STP applications — treated water handling, filtration units, and utility water transfer. CI/GG20 casing and impeller, oil seal.
Multistage · stainless
Stainless steel horizontal multistage pumps for high head at low flow — pressure boosting, water circulation, mini RO systems and washing. Two series, PH2 and PH4, up to 94 m.
Pressure boosting
For apartments and bungalows, car washing, and geyser applications. CI pump casing, SS304 impeller and diffuser, SS431/SS420 shaft, carbon/ceramic mechanical seal.
04 — Food waste disposers
Electric food waste disposers that grind kitchen scraps in seconds and flush them down the drain — the CD domestic range for home kitchens, and the Tabletop and Standalone series for commercial and institutional kitchens, from 300 to 1500 kg/hr.
Domestic · entry
Fits under a home kitchen sink and grinds food scraps in seconds through a three-layer grinding system, then flushes them down the drain. 0.5 HP PMDC motor, 1000 ml grinding capacity.
Domestic · small households
Six-stage grinding and a 0.75 HP PMDC motor in a compact under-sink body, with a smart remote-control switch for easier installation. 1200 ml grinding capacity.
Domestic · full stainless
Nine-level grinding in a full stainless steel grinding system, driven by a 1 HP adjustable DC motor that peaks at 1080 W, with automatic power adjustment and smart troubleshooting. 1400 ml grinding capacity.
At-source reduction
Turns food waste into a homogeneous, digestible mixture. Suitable for at-source installation in commercial kitchens, hotels, and institutional canteens, or as part of a centralized pre-processing line feeding a larger biogas system.
Full specifications
Standalone cabinet
An independent, floor-standing crusher cabinet that plumbs into existing flushing water, drainage and power — an independent unit for any commercial or industrial kitchen. Same mechanism as the Tabletop series, seven capacity models, 300–1500 kg/hr.
Commercial kitchens are sized by the waste they handle: softer plate scraps, medium bones and shells, or any type of bone, and how long the disposer runs without stopping. Our team sizes the Tabletop or Standalone model to that, rather than a fixed package.
Construction
Standard across the sewage pump range, with SS options and graded steels available for special applications.
Selection
A starting point, not a substitute for an assessment — tell us the duty and our engineering team confirms the series and size against your actual conditions.
Common questions
Cutter Pumps (PC) use stationary and rotating cutters for fibrous and hard material; Grinder Pumps (PG) are built for similar solid- and fibre-laden sewage; Chopper (PCC) and Chopper Grinder (PCG) handle oversized solids and stringy material at higher flow and head, with the PCG specifically suited to biogas feedstock transfer.
Yes. Point supplies standalone pre-processing and treatment equipment for sites that already have digestion or treatment infrastructure, or are upgrading an existing system — as well as retrofits of aerators, mixers, and decanting pumps into existing plants.
Jet Aerators use the venturi-nozzle principle and suit small-to-medium sewage plants up to 6 m depth; Radial Aerators are self-aspirating and install easily even in a flooded tank; Push Flow Aerators combine fine-bubble aeration with mixing and circulation, and suit ponds, lakes, and landscape water rather than industrial tanks.
Sizing is based on your channel width, tank depth, and flow or treatment capacity. Our engineering team assesses these before recommending a model — bar screens alone span 800 mm to 3000 mm channel widths with grid gaps from 10 mm to 100 mm.
Yes — impellers and casings are available in graded steels for special applications across several series, including the PS, PC, PG, and PA ranges.
The pre-processing range is designed to improve feedstock quality ahead of any digestion system, and the treatment range supports both new builds and retrofits into existing infrastructure. Talk to our team about compatibility with your existing setup.
