Food Waste Disposer · Domestic
CD 750
Domestic Food Waste Disposer
A 550 W domestic food waste disposer with a powerful seventh-generation, six-stage grinding system and a smart remote-control switch, for easier installation and convenient everyday use under the kitchen sink.
- Capacity
- 1200 ml
- Motor
- 0.75 HP PMDC
- Grinding
- Six-stage
- Speed
- 3500 rpm
What it’s for
Exquisite craftsmanship. The best choice for small households.
CD 750 is built for small households: a 550 W motor driving a six-stage grinding system that reduces food scraps fine enough to flush straight down the drain. A smart remote-control switch means no wall switch has to be wired in beside the sink, so it’s quicker to install and easier to use.
The grinding system is Bakelite, with SS 304 impeller and cutter blades on a steel shaft.
Construction
How It’s Built
A Bakelite grinding system with stainless steel doing the cutting — the material specification from the catalogue, part by part.
Specifications
Technical Data
- Supply
- 240 V / 50 Hz
- Motor
- 0.75 HP PMDC (550 W)
- Speed
- 3500 rpm
- Capacity
- 1200 ml
- Grinding system
- Six-stage
- Switch
- Air switch / direct, remote control
CD 750 — Technical specification
- Sink flange diameter
- 80 mm
- Outlet pipe
- 45 mm
- Total height
- 360 mm
- Grinding system
- Bakelite
- Impeller
- SS 304
- Cutter blades
- SS 304
- Shaft
- Steel
Dimensions
Construction
Applications
Where It’s Specified
Fitted under the kitchen sink to an 80 mm sink flange, it takes scraps as they’re scraped off plates and chopping boards, so food waste never sits in a bin.
For restaurant, hotel and canteen kitchens, the Tabletop series mounts on a work sink and the Standalone series stands on its own, 300 to 1500 kg/hr.
Common questions
Frequently Asked Questions
Will it fit under my kitchen sink?
CD 750 mounts to a sink with an 80 mm sink flange. It stands 360 mm tall under the sink, and its 45 mm outlet pipe connects to the drain.
How is it switched on?
With its smart remote-control switch, which makes installation easier — or with an air switch or direct electrification on a 240 V / 50 Hz supply.
How is it different from CD 500?
It does more, faster: 1200 ml against CD 500’s 1000 ml, six-stage grinding against three-layer, and a 0.75 HP motor at 3500 rpm against 0.5 HP at 2800 rpm — plus the remote-control switch.
What if I need more capacity?
The CD 1000 steps up to 1400 ml, a 1 HP motor and nine-level grinding. For restaurant, hotel and canteen kitchens, the Tabletop series and Standalone series handle 300 to 1500 kg/hr.